| 糸の指定 | Φ12.5-6mm - Φ27.5-6mm |
|---|---|
| 接続タイプ | ねじ込み、フランジ付き |
| 最大圧力 | 6MPa - 10MPa |
| デザイン | シールに金属をかぶせるガラス |
| 名前 | 密閉サイト グラス |
| デザイン | シールに金属をかぶせるガラス |
|---|---|
| 最高圧力 | 6MPa - 10MPa |
| 接続タイプ | ねじ込み、フランジ付き |
| 糸の指定 | Φ12.5-6mm - Φ27.5-6mm |
| 材料 | 鋼鉄1215 |
| 名前 | 密閉サイト グラス |
|---|---|
| 材料 | 鋼鉄1215 |
| デザイン | シールに金属をかぶせるガラス |
| 最高圧力 | 6MPa - 10MPa |
| 接続タイプ | ねじ込み、フランジ付き |
| Surface Treatment | Electroless Nickel |
|---|---|
| Mechanicalstrength | High Tensile And Compressive Strength |
| Sealing Method | Glass-to-Metal Seal |
| Connector Type | Single Pin |
| Leakrate | < 1 X 10^-9 Atm-cc/sec |
| High Sealing Performance | 4MPa Does Not Leak |
|---|---|
| Sealing Method | Glass To Metal Seal |
| Electricalinsulation | High Dielectric Strength |
| Leak Test | 4MPa N2 Pressure No Leak |
| Thermalexpansioncoefficient | Matched Between Glass And Metal |
| Productname | Glass To Metal Seals |
|---|---|
| Surface Treatment | Electroless Nickel Plating |
| Operating Temperature | -55°C To +200°C |
| Body | 304 STAINLESS STEEL |
| Corrosionresistance | Excellent |
| Pin | 4J50 ALLOY |
|---|---|
| Insulator Resistance | 100MΩ@1000VDC |
| Rated Voltage | 410-750V |
| Connector Finish | Nickel Plated |
| Dielectric Strength | 3000VAC |
| Surface Treatment | Electroless Nickel |
|---|---|
| Sealtype | Hermetic |
| Body Material | 304 Stainless Steel |
| Glass Materials | ELAN #48 |
| Pin Materials | 4J50 Alloy |
| Body Material | 06Cr19Ni10 |
|---|---|
| Thermalexpansioncoefficient | Matched Between Glass And Metal |
| Stress-resistant | 1.0MPa |
| Pin Materials | 4J50 |
| Contact Resistance | 1000 MΩ |
| Manufacturingprocess | Sealing By Controlled Heating And Cooling |
|---|---|
| Color | Golden |
| Pressure Range | Vacuum To 1000 Psi |
| Application | Electrical Feedthroughs, Vacuum Tubes, Sensors |
| Current Rating | 30A |
